方腔内耦合传热传质非对称流动数值模拟

对带有质热源的方腔内流体传热传质进行数值研究。针对不同Ra、Nc、Sr和Df，探究对称方腔内流体传热传质的分岔特性。结果表明：存在临界Ra_c使流体流动形态发生转变，当Ra<Ra_c时，流体流线、温度场和浓度场对称分布；当Ra>Ra_c时，流体发生偏斜。增大浮升力，流体更易发生分岔现象。增强Soret和Dufour效应可增强传热对称性并增大流体发生分岔的临界Rayleigh数。     

Combination of double and single cyclic pressure alternation technique to increase CO2 sequestration with heat mining in enhanced geothermal reservoirs by thermo-hydro-mechanical coupling method

The rise in global temperature due to an unceasingly increase in non-condensable gases (NCG) prompts more development of safe and economical CCUS (Carbon Capture Utilization and Storage) technologies. Carbon dioxide (CO₂) sequestration with heat mining in deep enhanced geothermal systems (EGSs) is one of the promising methods to reduce CO₂ emitted to the atmosphere. In this study, a cyclic alternation of pressures at the injection and production wells is applied in an EGS for heat mining together with CO₂ deposit. Simultaneous alternation of the injection and production pressures can significantly increase the amount of CO₂ sequestrated compared to applying a fixed pumping or withdrawing pressures at the injector and producer respectively. At the injection well, alternation in pumping pressures at high frequency (small interval of days) increased CO₂ sequestration rate. Reducing the pumping frequency resulted in the lowering of the total amount of CO₂ sequestrated, lesser than using a fixed pumping pressure. The alternation in pumping frequency has a direct relationship to the CO₂ sequestration rate. The frequency of the injection and production pressures refers to the interval in days of the interchange in pressure between high to a low value and vice-versa. Furthermore, simultaneous alternation of pressures at the injection and production wells respectively (double cyclic method) improved geothermal heat extraction efficiency, thus higher performance for both geothermal and CO₂ sequestration projects.     

Variable stage-independent double sampling plan with screening for acceptance quality loss limit inspection scheme

The quality loss suggested by Taguchi has been recognised as a new quality evaluation based on variable property instead of the quality evaluation based on traditional attribute property such as the proportion of nonconforming items. Some variable sampling inspection plans in order to assure the quality have been considered. As one of those sampling inspection plans, the single sampling plan with screening (SSPS) has been constructed for acceptance quality loss limit inspection scheme. Further, the repetitive group sampling plan with screening (RGSPS) has been developed for reducing the average total inspection (ATI). Although ATI by RGSPS has successfully been reduced in comparison with ATI by SSPS, RGSPS may sometimes increase the average sampling frequency (ASF) in return for reducing ATI. In this study, the stage-independent double sampling plan with screening (SIDSPS) based on the concept of the acceptance quality loss limit inspection scheme is proposed under the consideration of the trade-off between ATI and ASF. Through some numerical comparisons about ATI and ASF in SSPS, RGSPS, and SIDSPS, the usefulness of SIDSPS proposed in this study is confirmed.     

基于WinForm的航天电磁继电器动态特性测试系统软件设计与实现

动态特性是航天电磁继电器的重要特征之一，在继电器的生产与研究过程中需要进行测试与分析。现有条件下，动态特性测试系统测得的结果以文本和图像形式保存在本地计算机中，研究人员需采用人工作业的方式对文本文件和图像文件进行分析。针对上述问题，本文设计了一套基于WinForm的动态特性测试系统软件，具体分为客户端软件与服务器软件，双方基于Socket多线程通信实现文本文件和图像文件传输的及时性与可靠性，突破了研究人员本地作业的空间局限性；基于双缓冲技术绘制文本文件的曲线图，加强对测试结果的直观性分析；基于图像调用与局部放大技术，实现对图像的有效处理与显示。测试结果表明，所设计的系统软件运行稳定，分析与显示结果直观准确，具有较高的使用价值。     

陈四楼煤矿“123456双重预防体系”的建设与应用

针对煤矿“双重预防体系”如何落地生根问题，结合陈四楼煤矿在风险分级管控和隐患排查治理方面的实用方法和“双重预防体系”的建设经验，深入研究了“双重预防体系”的相关标准、风险隐患事故之间的关系及其各自的产生和发展机理、安全风险的有关辨识评估方法、事故隐患的排查和治理方法，分析了传统安全管理模式与“双重预防体系”的新型安全管理模式的差别，总结出了“123456双重预防体系”这个囊括了事前安全风险辨识、事中隐患排查治理、事后安全现状评估的创新成果，实现了“事前、事中、事后”的全过程控制，对夯实煤矿安全管理根基、促进矿井平稳有序发展发挥着越来越重要的作用，为煤炭行业“双重预防体系”的落地生根提供了借鉴和参考。     

中空夹层金属管混凝土构件侧向冲击试验研究

为提高海洋平台结构的抗冰能力，提出一种新型中空夹层金属管混凝土导管腿构件。通过理论分析、数值模拟和试验相结合，研究不同外钢管材料（Q345钢、奥氏体304级不锈钢和T6061铝合金）对中空夹层钢管混凝土构件的影响。通过单次冲击和连续冲击两种加载方式进行加载，并与钢质空心导管腿进行对比，试验结果发现：组合构件抗冲击性能优于空管构件，铝合金组合构件整体抗冲击能力较差，不锈钢单次冲击作用下极限承载能量高达18.83 kJ以上，小能量连续冲击作用下承载冲击次数最多，不锈钢组合构件抗冲击力学性能最好。结合有限元ABAQUS软件，对单次冲击构件建模并得出计算结果，与试验结果基本吻合。     

Double emulsion‐encapsulated guggul exhibits improved in vivo hypocholesterolaemic action in rats

Guggul tree or Commiphora mukul is a small thorny herb having remarkable hypocholesterolaemic properties. Its therapeutic effects are because of its biocomponent guggulsterones, especially guggulsterone E and Z. In this research, double emulsion‐based spread was tried to improve the bioavailability of the herb guggul in in vivo rat model. The effect of the different diets with encapsulated and nonencapsulated guggul was evaluated and compared after 6 weeks, based on the final body weight and analysis of organs, serum and faeces of normal and hypercholesterolaemic (H) rats. It was evident from the results that double emulsion‐encapsulated guggul showed better control on weight of H rats (25.98% lower), inhibition of HMG CoA reductase (3.95 times less) activity and reduction in atherosclerotic index (47.2%), as compared to diet with unencapsulated guggul. Encapsulation of guggul also improved faecal excretion of bile acids, lipids and total cholesterol in H and normal rats.     

Three‐dimensional color prediction modeling of single‐ and double‐layered woven fabrics

In this research, the three‐dimensional structural and colorimetric modeling of three‐dimensional woven fabrics was conducted for accurate color predictions. One‐hundred forty single‐ and double‐layered woven samples in a wide range of colors were produced. With the consideration of their three‐dimensional structural parameters, three‐dimensional color prediction models, K/S‐, R‐, and L*a*b*‐based models, were developed through the optimization of previous two‐dimensional models which have been reported to be the three most accurate models for single‐layered woven structures. The accuracy of the new three‐dimensional models was evaluated by calculating the color differences ΔL*, ΔC*, Δh°, and ΔE_CMC(2:1) between the measured and the predicted colors of the samples, and then the error values were compared to those of the two‐dimensional models. As a result, there has been an overall improvement in color predictions of all models with a decrease in ΔE_CMC(2:1) from 10.30 to 5.25 units on average after the three‐dimensional modeling.     

Double Dianhydride Backbone Polyimide Aerogels with Enhanced Thermal Insulation for High‐Temperature Applications

Aerogels owe their high thermal insulation and other unique properties to their nanostructure configuration. However, controlling the aerogels' morphology is always a scientific challenge. In this study, double dianhydride backbone (double backbone) polyimide aerogels with tailored nanostructure assembly are created for the first time. This is achieved by controlled polymerization reaction of oligomers with distinct dianhydride monomers. Combining the two oligomers through a controlled polymerization reaction is a successful strategy for tailoring the aerogels nanostructure assembly as well as other properties. The fabricated double backbone aerogel presents 40% reduced thermal conductivity of 19.7 mW mK^?1 over previously studied polyimide aerogels along with the compression modulus of 1.64 MPa at a relatively low density of 0.068 g cm^?3. Such low thermal conductivity is comparable with the inorganic counterparts. Light in weight and high thermally insulated polyimide aerogels with suitable mechanical properties and high service temperature are an appropriate replacement for current fireproof insulation materials.     

Distribution-free double-sampling precedence monitoring scheme to detect unknown shifts in the location parameter

In most applications, parametric monitoring schemes are used to monitor the majority of industrial and nonindustrial processes in order to improve the quality of the outputs or services. However, parametric monitoring schemes are known to underperform when the normality assumption is not met or when there is not enough information about the symmetry or asymmetry nature of the process underlying distribution. Hence, in this paper, a new nonparametric Phase II Shewhart-type double-sampling (DS) monitoring scheme based on the precedence statistic is proposed in order to efficiently monitor quality processes when the underlying process distribution departs from normality. The performance is investigated using the average run length (ARL), standard deviation of the run length (SDRL), expected ARL (EARL) and expected average number of observations to signal (EANOS), and the average sample sizes (ASS) metrics. The latter metrics are computed using Monte Carlo simulation and exact formulae. In general, it is shown that the new DS precedence scheme outperforms the existing basic Shewhart precedence scheme with and without supplementary runs rules in many situations. A real-life illustrative example based on a filling process of milk bottles is provided to demonstrate the application and implementation of the new DS precedence monitoring scheme.